Abstruse and Obtuse

Abstruse and Obtuse Abstruse and Obtuse Abstruse and Obtuse By Maeve Maddox Some writers seem to be confusing obtuse with the word abstruse, as in these incorrect examples on the web: Believe it or not, the American public wasnt always in love with Alfred Hitchcock. Because his movies were often too intelligent or obtuse, he had more fans in the film elite than he did in the general public. Grizz tends to make Shakespeare-esque, outsider-looking-in type observations about the situations at hand, while Dot Com spouts highly intelligent, yet obtuse references that send you (or maybe just me) to Google. Having finally struggled through Ulysses, and yes it was a struggle, I had no patience at all for FINNEGANS WAKE, which is even more obtuse. Has anyone actually read it? All of it? I chide Brad DeLong all the time for making excuses for Greenspan’s thick, obtuse, obscurant speech. In each of these examples, the context calls for a word that means difficult to understand. That word is abstruse: The mistake of using abstruse where obtuse is intended seems to be less common, but it happens: It is really abstruse to find Avatar not grabbing anything from the Oscars. It was altogether a new theme with a lot of innovations This movie fan seems to be reaching for obtuse, a word that means lacking in perception, stupid. Bottom line: Barely comprehensible language is abstruse. Stupid people are obtuse. Note: Obtuse derives from Latin obtusus, blunted, dull. An obtuse angle is blunt, as opposed to being sharp. Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Misused Words category, check our popular posts, or choose a related post below:Wether, Weather, Whetherâ€Å"As Well As† Does Not Mean â€Å"And†How Do You Determine Whether to Use Who or Whom?

Free sample - The Role of CIOs in Innovation. translation missing

The Role of CIOs in Innovation. The Role of CIOs in InnovationIntroduction The article â€Å"The Internet of Things: How CIOs Can Influence the Next Wave of Product Innovation† is a current article on technological issues in a company and it explains how technological advancement in internet is geared to revolutionize human life in a great deal and the role of CIOs in encouraging innovation through the use of internet and other form of communication. This article comprehensively analyzes technological development and innovation which CIO is putting forward to not only improve human life but also improve profitability in doing business. According to Nash, (2010,p.1), â€Å"By combining the capabilities of the Web, cloud computing, analytics and tiny intelligent sensors, CIOs can help create wholly new products and services connected to networks and to each other† The article stresses the role of CIOs are strategic and critical in driving technological innovation to the next level. This is because there role is much more of marking and data coll ection which are letter transformed into product innovation. CIOs role goes beyond keeping the light of IT on in accompany since it encompasses marketing role as well as research Nash, (2010,p.2). This paper takes a critical and a comprehensive analysis of the role of CIOs in influencing innovation in a company. In addition the paper examines the role of IT and internet in the process of globalization and business opportunities How CIOs can influence innovation Ø   Making new friends Networking is one the best way of making and keeping friend and since human being learn from each other, it is through this that CIOs get new concepts and can influence innovation. Interaction and meeting new friend present an opportunity of getting new ideas, technologies as which when adopted bring meaningful change in a company. Ø   Jumping right in the business CIOs should be out going individuals who initiate conversations and should never wait to be asked for such communication which can lead to innovations. This strategy is quite important since it saves time and provides faster adoption of new technologies in the market. Ø   Shaking the pillars It is the responsibility of CIOs to be ready for change at all times since this will actually improve on the need for innovation in a company. How to achieve innovation in IT Ø   Delay the RFP The innovation goal should be the core and integral factors in outsourcing for innovation and therefore RFP should be delayed for this goal to be achieved. Ø   Clearly define innovation According to Nash, (2010), â€Å"True innovation might mean continuous process improvement, emerging technology implementation, new best practices, IT transformation or competitive advantage. A clear definition of innovation is required so that the contract will reflect the appropriate financial and other terms associated with it†. In this regard, CIOs should carefully involve all the stakeholders and departmental team in defining the kind of innovation they require. Ø   Use outsourcers as consultants   This strategy will provide a great opportunity for the IT providers to improve their services which in turn lead to innovation in the field. Ø   Lock everyone in a room to brain storm Putting everyone in a room to brain storm on the best way to improve a given IT service provide all stakeholders with opportunity to think and come up with new concepts which in most cases result in innovations. Ø   Motivate the team in IT department Motivation is a powerful incentive to innovation and therefore CIOs should all the time work hard towards designing a motivational package to all the team he or she works with so as to keep innovation process on and active. Marketing concept which strive to build a company a round a profitable satisfaction of customer needs and demands is the most critical key which has helped many companies and different brands to develop in parts of the world. However, the success of these companies and brands is on the other hand pegged on well designed marketing strategies which not only ensures a high rate of product penetration but also ensure that the products compete highly in the market and the role of CIOs in this task is inevitable. Multi-channel retailing which can be improved by CIOs through several strategies   has been defined as the opportunity presented to the same customer to obtain the same product from the same retailer by multiple purchase channels According to Nicholson, Clarke and Blakemore (2002,p.45), this multi-channel marketing strategy attempts to foster the customer’s behavior to be multi-channel. Those companies that obtain part of their sales from two different channels can be classified as having adopted the multi-channel approach as contrasted with the ones whose entire sales volume is generated from the pursuit of a single channel (Nicholson, Clarke and Blakemore, 2002, p. 12)   Many customers use multiple channels during the purchase process such as research, during the purchase process and while obtaining services (Stone, Hobbs and Khaleeli, 2002, p. 74). In this regard, it has been advanced that where organizations decides to adopt a multi-channel strategy in communication and marketing, then attention needs to focus on whether all the channels will be offering similar services or products range and whether they will have all the functional areas. Of paramount importance here is the need to define the role that the various channels are intended to function and the associated interactions, as this helps in the identification and facilitation of both the use and preferences emphasis for the targeted segments. Several advantages of multi-channel strategies in search of innovation have been presented in literature. According to Lawson, (2001, p. 31), channels have different advantages depending on the type of interaction with the various customers. This point has been buttressed by Souza and Serrentino (2002,p.87) states that customers look for different channels depending on the kinds of products, the moment of purchase and the prevailing motivation. The researchers have broadly categorized these behaviors within three domains of retail emotion where the experience of purchasing performs a fundamental role, retail reason in which case price is the overriding factor of the purchase and finally, retail convenience. According to Lawson (2001,p.94), â€Å"the critical factors for the accomplishment of a multi-channel strategy encompasses the complete integration of the brand, product position, inventory forecast, price, logistics and the expectations of the customers.† As Lawson (2001, p.12) points out, the adoption of IT in marketing and information collection from the clients brings positive results such as increases in sales volumes, costs reductions and increased levels of operations. Integrated channels in the opinions of Stone et.al (2002, p.49) also affects positively brand loyalty and customer’s life time values and this is possible with appropriate technological innovation.   Conclusion CIOs role is quite significant for a wave of innovation in companies in this era of technological advancement. This is only possible when they are well equipped and ready to implement strategies which are geared towards innovation. This will go along way in making the companies competitive as well as drive economic development in a country and globally. Information Technology plays a pivotal role in the success of a company and the economy at large. Towards this it is prudent for CIOs to improve embrace change which are geared towards innovation as impetus to scaling up economies of scale in accompany. Works cited Keller, K.L (1993). Conceptualizing, Measuring, and Managing Customer-Based Brand Equity.Journal of Marketing, 57, 1-22. Kotlar, P. (2003). Marketing insights from A to Z: 80 concepts every manager needs to know. John Wiley and Sons Kotler, P. and Amstrong, P, (2007). Principles of Marketing. John Wiley and Sons Lawson, K. (2001). Commercials That Name Competing Brands.   Journal of Advertising Nash, K.S. (2010).The Internet of Things: How CIOs Can Influence the Next Wave of Product Innovation. Access on 18th Nov.2010 from www.cio.com Nicholson, J. Clarke, G. and Blakemore, Y. (2002). Going to market: Distribution Performance: The Role of Brand Loyalty. Journal of Marketing, 65: 81-89. Souza, M.G., and Serrentino, A. (2002). Will the growth of multi-channel retailing Stone, M., Hobbs, M and Khaleeli, M. (2002). Multi-channel customer management: the  Ã‚   benefits and challenges. Journal of database management, 10 (1), 39-45.Systems for Industrial Products. Boston: Harvard Business School Press. Zeithaml, K. (2002). Brand Loyalty Programs: Are They Shams? Marketing Science,24(2): 185-19

If official corruption is such a problem for the legitimacy of the Essay

If official corruption is such a problem for the legitimacy of the People's Republic of China, then why have the Chinese Commu - Essay Example The main reasons why PRC has waged war against corruption is the fact that it undermines the legitimacy of the Chinese Communist party, it fuels societal unrest, and adds to the economic inequality in the country. If the communist party does not formulate policies that will contain the wide spread corruption in China, then it will be spelling doom for the economic future of the country and the political stability too. Analysis and Causes As pointed out earlier, the major forms of corruption in the PRC are embezzlement of funds, bribery, nepotism, statistical falsification, patronage, backdoor deals, and grafts.All these are common and rampant in power positions. This explains why the standard definition of corruption in China is the use of public authority and resources for personal and private interests. When any state functionary takes advantage of their office and appropriates, steals, or swindles public money, or takes it in to their possession by any other illegal means, then it is said that corruption has occurred. Moreover, when a state functionary extorts money or property from an individual for the benefit of another person or illegally accepts money from a person in order to secure benefits for that individual, or the state functionary misappropriates public funds for either personal use, illegal dealings, or for profit making purposes, then corruption has occurred. If any citizen gives money or property to a state functionary, or introduces a bribe to them for the purpose of securing certain benefits, then the two can be accused of being involved in corrupt dealings. All these occurrences are in accordance with articles 382 and 396 of the criminal law of the People’s Republic of China. Combating corruption has been a main agenda for the Chinese Communist Party (CCP) over the last three decades with every transition of government. During this period, two major anti-corruption campaigns were launched; one in the late 1970’s, and the other in 1989 following the Tiananmen crackdown on the pro-democracy movement. This paper will mainly focus on the 1989 campaign and all other attempted reforms that followed as they fall under the 25 year period that is under study. The efforts of China to eradicate poverty are often frustrated by the enforcement constrains in the country. The CCP employed a strategy dubbed enforcement swapping. This strategy relied on intensive periodic campaigns which were targeted at the big fish. This strategy was credited to have successfully lowered the levels of corruption beyond the tipping point; a point which if surpassed, would have resulted in to a crisis of corruption and overwhelmed the parties enforcement resources (Manion, 2004. P.158). This strategy is said to have been employed out of necessity simply because the CCP lacked enforcement resources and the capacity to wipe out corruption. According to Wedeman, (2004,p.899), the campaign style of enforcement is aimed at controlling corrupt ion rather than eradicating it. This is irrespective of the manner in which it is used; randomized or recreational. This is the very first reason why attempts to eradicate corruption in China by CCP have failed. The communist’s party strategy to eradicate poverty was misguided simply because this strategy is formulated to specifically control corruption, not eradicate it. There is also the probability that the CCP knew exactly what the strategy was

Operations and Business Systems Management Research Paper

Operations and Business Systems Management - Research Paper Example Cadbury’s have been a renowned English manufacturer of chocolate products for more than 100 years. Today, as Cadbury – Schweppes, the firm is a major food products conglomerate, but one with very deep roots. Indeed, the current mission statement of the company echoes the philosophy of John Cadbury, the committed Quaker who founded the company in 1794. Cadbury’s mission stresses on many objectives. It also explicitly sets out a commitment to encourage the personal fulfillment of employees and a major thrust is given to customer satisfaction. How the company manages its different processes as such – manufacturing, distribution, etc and its various operations and sub-operations would be detailed here. There have been a large number of strategic decisions and a operational research and development involved in making the products a huge success throughout the world. The emphasis was laid not only on the major operations of manufacturing, marketing and distributing but also on a large number of sub-operations which are essential in very process. Cadbury is now market leader in UK chocolate confectionery, with worldwide exports and volume is continuing to increase by about ten percent per year. Volume in general refers to the number of times an operation has to deliver a service or product. The usual descriptors for the volume dimension are high volume, medium volume and low volume. The distinction between these three categories is usually drawn on a subjective basis. The firm deals with high volume operations.... The firm deals with high volume operations supplying repetitive or standardized products and services. This allows for repeatability, specialization and systemization usually resulting in relatively low unit costs. Higher volume operations can gain efficiency by breaking down the tasks into small units so staff specializes in only a small part of the total work. It is a known fact that volume is the inverse of variety. A low variety market is by definition high volume. Operations can be set up to produce a single product or service, or a range of very similar products, very efficiently. There is no need to allow for variation in material, specification or process. Indeed Cadbury's deal with similar products mostly chocolate based - cocoa, drinking chocolate, chocolate bars and so on, thus the operations could be set up to produce them more effectively and efficiently. The major challenge here would be global deployment of a set of volume products. This could also be overcome if correct measures are taken and right strategies are being followed. Similarly, the greater the variety of product or services produced, the more flexible the operation has to be. Flexibility can be seen as a response to two types of stimuli - variety and uncertainty. Variety indicates the necessity of the processes to adopt a range of operating conditions. For example, to cope with the existing range of service parts, components or products, to adapt products or services to varying customer requirements, to be able to adjust output levels to cope with seasonality, or to be able to expedite orders to different levels of priority. Initially, Cadbury Ltd sold only tea, coffee, cocoa and drinking

Critical Analysis of International Negotiation between Israel and Gaza Essay

Critical Analysis of International Negotiation between Israel and Gaza in 2008-2009 - Essay Example It has been reported that they Qassam rockets have been launched over Israel over three thousand times in 2008. However, principle leaders of Hamas have been enraged by the continuing blockades which Israel have maintained and the lack of any significant political movement made by the agreement from June to December, therefore increased the number of rockets launched over Israel yet again. In response Israel instigated a counter-attack against Hamas, with a combination of air attack and naval attack on the Gaza Strip, ending with more than three hundred and fifty people dead, almost fifteen hundred injured and many buildings ruined. In further retaliation, Hamas leader declared that they would increase the amount of rockets launched, and send into Israel more suicide bombers (Taylor, 2008). On the 27th December air attacks over the Gaza Stripe, initiated by the Israel Defence Forces (IDF), found target with over forty hits on Hamas headquarters, buildings and stores. This was the dea dliest day in the sixty years that this war has been raging between Israel and Palestine. These events ignited protests in and around both these countries (Global Voices, 2008). Since the attack on 27th December by Hamas who broke the cease-fire by launching Qassam rockets over their territory, Israel have stated that they then had no alternative but to fight back by declaring hostilities on Gaza in retaliation. The Foreign Minister, Tzipi Livni, stated that they had attempted all they could in order to halt an offensive attack (Niva, 2009). Niva (2009) however, argues that these sentiments are extensively in opposition with the reality that Israel’s political, and also military leadership took several forceful moves throughout the cease-fire which made worse the crisis with Hamas, and may have even motivated Hamas to generate an excuse for the attack. Therefore, Niva (2009) believes that the current war that is now raging at the beginning of 2009, between

The Intensity Of Agglutination

The Intensity Of Agglutination Antibodies are proteins produced during bodies defence against foreign antigens and they are driven from plasma cells. In the event of an immune response B lymphocytes initiate the production of IgM antibody. In comparison to other immunoglobulins IgM is the largest and earliest antibody available in response to an antigen (Bailey Johnson, 2006). The large structure of this antibody is because it consists of an additional domain in its constant area (Overfield et al, 2007). This antibody has a polymeric structure it consists of heavy and light chains. The binding between two heavy chains or between heavy and light chains is facilitated via the disulphide bond. IgM antibody has a pentameric structure consisting of five subunits. These subunits are joined together via a disulphide bond which occurs between the Fc region and the intersubunit, interasubunit- J chain. Two fab antigen binding sites are available on each IgM monomer and since IgM has a pentameric structure ten Fab antigen binding sites are available that can potentially interact with ten antigens (Overfield et al, 2007)(Khurana, 2006). The initial aim of this practical was to discover if red blood cell antigens can interact with IgM anti-D (Rh) antibody and weather as a consequence of this interaction agglutination occurs. The second aim was to discover weather dithiothreitol (DTT) reducing agents is capable of altering the structure of IgM antibody at different concentration hence affecting the level of agglutination and finally to discover if indirect anti-IgM antibody is capable of facilitating agglutination. The large and pentameric structure of IgM antibody can potentiate the possibility of its interaction with red blood cell antigens resulting in formation of agglutination. Material Method For instructions on how to conduct the experiment with the relevant materials used please refer to the practical schedule. The concentrations of DTT added to the nine tubes where as following (0.001, 0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009 0.01). Results Table 1: The above table illustrates the number of tubes labelled from 1-10 and the concentrations of DTT in (Mol/L). As illustrated in the above table the control tube which is tube 1 lacked DTT while tubes which were numbered as (2, 3, 4, 5, 6 7) consisted of different concentrations of DTT as shown here (0.001, 0.002, 0.003, 0.004, 0.005, 0.006 0.007). According to the first observation results tubes numbered 1-7 expressed signs of agglutination as indicated by a positive sign (+). Instead tubes numbered (8, 9 10) which had the following DTT concentrations (0.007, 0.008 0.009) expressed no indications of agglutination hence they were marked as negative (-). Due to time limitations results for the second antibody labelling could not be obtained. Discussion The intensity of agglutination in these tubes depended on the concentration of DTT. The control tube which is tube 1 is DTT deficient which is accompanied with agglutination. Tubes labelled 2-7 express different concentrations of DTT starting from the lowest hence escalating slowly. In these tubes agglutination is still observed since the effect of DTT is still not strong enough to break the bonds expressed in IgM antibody while as the concentration of DTT escalates further in tubes 8-10 agglutination is not evidenced. DTT is a reducing agent capable of mediating intersubunit and interasubunit-J chain cleavage hence facilitating IgM subunit (Â µ2ÃŽÂ »2) synthesis (Kownatzki Drescher, 1973). As the concentration of DTT escalates its capability to break these bonds with greater intensity increases as seen in tubes 8-10 leading to greater IgM subunit formation (Â µ2ÃŽÂ »2) and lessens the possibility of antigen antibody interaction hence lack of agglutination. In addition DTT a ffects the structure of IgM heavy and light chains by preventing them from unfolding and causes this chain too separate accordingly leading to agglutination deficiency. A continuous raise in DTT concentration as evidenced in tubes 8-10 causes a decline the probability of disulphide bonds from resuming their function in IgM antibody (Valetti Sitia, 1994). According to the study conducted by (Marrodan et al, 2001 Morris et al, 1974) DTT reducing agent restrains agglutination from occurring by facilitating the disulphide bond located in the IgM antibody to break. In addition the 19 S IgM antibody is cleaved by DTT into a 7S subunit. The 7S antibody subunits are rendered incapable of maintaining IgM antibodys function and therefore wont be able to interact with red blood cell antigens leading to lack of agglutination (Knight, 1978). Due to time limitation for the experiment results for the second antibody labelling could not be obtained. According to (Overfield et al, 2007) the lacking agglutination as a consequence of DTT effect can be reversed by adding anti-IgM antibody hence signs of agglutination will appear but the extent of agglutination will depend on whether the IgM antibody subunits have maintained their ability to bind to red blood cells antigen or due to high level of DTT concentration they have been completely deformed. According to the study conducted by (Emmerich et al, 2006) IgM antibody can be used in the diagnosis of Lassa virus infection which is highly predominant in Western African patients. This diagnosis is achieved via using reverse enzyme immunoassay (ELISA) technique to identify anti-Lassa IgM antibody. The result of this study implemented that via using reverse ELISA in 20 patients with sign of fever high level of anti-Lassa IgM antibody was diagnosed indicating the presence of the Lassa virus. In a study conducted by (Varsano et al, 1995) the presence of IgM antibody against respiratory syncytial virus antigen (RSV) was examined in 145 patients via using the ELISA technique. According to the result of this study ELISA-IgM antibody detection is a highly efficient method in the diagnosis of RSV at early stage of the disease. In another study by (Tsuda et al, 2001) polymerase chain reaction (PCR) technique was used to detect for the presence of IgM antibody against TT virus (TTV) in the diagnosis of human circovirus. The result of this experiment suggests that healthy volunteers were defective of anti-TTV IgM antibody whereas infected individuals showed signs of its presence suggesting that this method is beneficial for diagnosis purposes of human circovirus. Immunoglobulin cleavage can be triggered via the action of different enzymes or chemicals. Papain is an enzyme that cleaves IgG antibody into three segments of FC, heavy and light chains. Furthermore IgM antibody can be cleaved by pepsin enzyme either into an antibody that weights less accompanied with FC fragments (Rudmann, 2005)(Svehag et al, 1969). Protease enzyme is driven from Neisseria gonorrhoeae bacteria capable of cleaving IgA antibody (Pouedras et al, 1992). According to (Akesson et al, 2006) streptococcus pyogenes bacteria is responsible in mediating diseases such as gotonsillitis, septicaemia and it intervenes its action by causing IgG antibody cleavage via using an enzyme called Ides. The action of this virus is to insure that the antibody is unavailable to destroy the bacteria. Furthermore trypsin is another enzyme capable of cleaving IgM antibody at temperature above 50 C leading to different FC fragment synthesis (Andrew et al, 1970). Conclusion Normally red blood cell antigens are capable of interacting with IgM antibody resulting in agglutination while in the presence of DTT reducing agent this binding is inhibited leading to lack of agglutination. The extent of this inhibition will depend on the concentration of DTT and the extend of IgM J chain, interchain intrachain cleavage via DTT. The greater the concentration of DTT the stronger its effect is on this chain which lessens the likelihood of this chain regaining their binding capacity hence their ability to regain antigen binding activity. The concept of antigen antibody binding can be used for the diagnosis purpose of many diseases.

Andy Warhol :: Visual Arts Paintings Art

Andy Warhol "Paintings are too hard. The things I want to show are mechanical. Machines have less problems. I'd like to be a machine, wouldn't you?" Andy Warhol, 1963 Warhol was a modest artist and at time could be annoyingly blasà © towards his art. With a cheeky nature, Warhol is considered to be the most influential American artist of the second half of the 20th century. He has a signature style which he uses repeatedly in artworks, by using commercial silk-screening techniques to create identical, mass produced images on canvas then varying the color and tone to make each edition look different. Warhol was fascinated by Hollywood, fashion and style. He transferred this interest to his artwork, claiming not to see the difference between a museum and a department store. Blurring the distinction between art and life, he believed art could be fashion, decoration, and politics. Like his contemporaries Jasper Johns and Robert Rauschenberg, he borrowed images from popular culture for his artwork. He was also influenced by Marcel Duchamp, who took ordinary objects and displayed them as "readymade" works of art. His works also radically challenged high modernist ideas associated with the concept of originality and the role of the artist as an individual. Through this and through his obsession with money, fame, commercialism and mass culture he challenged high art, blurring the distinction between it and popular culture. He first applied his silk-screen techniques as a commercial artist in the 1950’s when a 5th avenue department store displayed his comic book superhero images. His initial entrance into Pop Art was in the early 60’s with his Coca-Cola Bottles and then sculpture of the brillo boxes which he replicated onto plywood boxes. By the completion of these 2 artworks one would establish that Warhol was challenging traditional notions of art by mechanically repeating a single image, mimicking the manufacturing industry and parodying mass consumption. Warhol’s subject matter went from one extreme to the other, one being a series titled: ‘Jews of the 20th century’, which is guess was Andy recognizing a repressed group and creating completely unassuming art about them. The other extreme being a series titled ‘Cowboys and Indians’ which yet again displays Andy’s childlike and innocent themes

God Sees the Truth but Waits Essay

It’s just the simple act of picking one of the many pieces of paper from a black box, one of which contains the dot that speaks of its drawer’s destiny†¦ Question is, is it an act or a choice—or, if it were possible, destiny itself? But if one would stop and think—and lay aside the ironies of a tragic death through a single tragic mistake—and look into—and, similarly, look through—the eyes of Tessie Hutchinson, her husband Bill, her son Davy, and all the other people in their town, one would stop short to have found out that their minds are a clear mirror of one’s own. Clearly, the story is but a simple twist in the nature of man that man himself has tried to magnify. In the beginning, the characters in the story are we, the bored, uninteresting people walking around and talking and showing up for a yearly event with nary a care in the world. Their eyes have seen people die, as we find out in the end—their eyes have seen their own wives and husbands and children slaughtered through pain, but their hearts only remember, but do not feel. And when the moment of truth comes out—as it always does—the bored people become aggressive, the seemingly unstained—but otherwise—hands take on an evil stance, the wives and husbands and children turn into something less than a stranger, and the pain and slaughter begins. In the beginning, the characters are we. Also in the end. It is, perhaps, an unexplainable terror to face head-on the inhabitants of the ordinary—not only is it ordinary as it seems, but also as what it really is—town and see them as our own flesh and blood, our own savage, twisted selves. But it only takes a little listening to the desires of our hearts and the dreams of our souls to unmask the truth that is clearly shown in the story, the truth that also rules our existence today. They are we. We are they. We are one with them—and they are one with us. We walk around and talk and go about our chores and go through the same routine over and over—we, the unsuspecting—and at the same time, the unsuspicious—with nary a care in the world. It is a routine that we go through that who could have thought would come out the way it always does, a routine with an end of which we have often seen with our own eyes, but would also shock the undiscerning. And then the end nears†¦and we still don’t care. We draw our lot, and it is clean—as if our own souls are, that is—big deal, we put the  piece of paper in our pocket and it is immediately forgotten. And then the end springs at us†¦we look the person who’s drawn the dotted lot—look him as if our own souls are anything but the piece of paper he has picked—with stranger’s eyes. We stone him to death, we forget who he is—friend, family member, father, son, husband†¦and he dies. We go about our chores again and walk and talk as if our civil hands were clean and leave the slaughtered lamb with a triumphant smile because we have won again, we did not draw the cursed lot, he did. It doesn’t matter who ‘he’ is—as long as it’s not we. Our own eyes have beheld the same old scene, but the heart only remembers—and doesn’t feel. We do not care if it would be we who would die next year, as long as we are left living today. We see not nor expect the time of our own downfall—we caused the downfall of another one today and it’s what matters at the moment. But time will come that we will be the center of the tragedy, too, and we will be looked on with hostile strangers’ eyes by our own friend, father, son, husband. Time will come that it is our own downfall with which they will stain their civil hands with blood. And their heart will not feel, only remember†¦and you will no longer see yourself in them but in that which you had killed, that which had died in your own savage folly. Amidst the pain you will be crying out, â€Å"Wait—it’s not fair! It’s not fair†¦!† And then you die.

Beware of Three Syntax Sins when Writing Business Proposals

Beware of Three Syntax Sins when Writing Business Proposals Sometimes the writing voice that speaks with confidence in your mind can trick you. Internally, you sound powerful, in control, and impressive. On paper, however, it can be a very different story. Poor syntax takes the confident writing voices in our heads and garbles it into an ineffective, hesitant sounding mush. We might not realize it because, frankly, we are used to seeing poor syntax in business writing. So the weak, timid-voiced writing passes through our proofreading radar unnoticed. Beware of the following three deadly sins of poor syntax when writing business proposals. If you eliminate these problems, your proposal will shine with confidence. 1. Refine Your Clarity Don't write with passivity. The passive voice likes to place the center of your sentence's action the subject that's doing the verb at the end of the sentence: i.e. "The sales numbers were calculated by John," which should be "John calculated the sales numbers." Here's a quick fix: if you scan your proposal for any use of the word "by," you will catch many of your passive sentences. The passive voice does have its uses, however. Its mild, cool-headed rhythm can be useful for conveying a business-like tone. But do not use it in excess. Strip your sentences of adverbs those little words we like to sprinkle into sentences to amplify our verbs and adjectives. It's amazing how clean, crisp, and powerful a sentence becomes when you strip the adverbs from it. Good novelists discovered this trick ages ago. However, you don't need a long list of adverbs to do this syntax cleanse. Just scan your manuscript for the most common offenders: the word "very" and any word that ends with "-ly" and remove it from the proposal. Your sentences will drop their excess weight and fly. Example: Before adverbs removed: Our CEO very happily confirmed that the incredibly effective new product line has attracted amazingly quick responses from very influential investors in a highly competitive market. After adverbs removed: Our CEO confirmed that the effective new product line has attracted immediate responses from influential investors in a competitive market. Of course, adverbs do have their purpose. Sometimes they help with tone and the rhythm of a sentence. But use them judiciously. 2. Drop the Jargon Using jargon creates a sense of insecurity. It's also annoying and distracting. What is jargon, exactly? It's the language of the business cultures we inhabit. Have you ever been asked what the primarytakeaway was from the meeting, instead of, "What did you take away from that meeting?" That's a classic example of jargon turning verbs into nouns. But jargon also turns nouns into verbs called "verbing." About Educationpublishing an article about verbing, and it used a dialogue from a Calvin and Hobbes cartoon to make its point: Calvin: I like to verb words. Hobbes: What? Calvin: I take nouns and adjectives and use them as verbs. Remember when "access" was a thing? Now it's something you do. It got verbed. . . . Verbing weirds language. Hobbes: Maybe we can eventually make language a complete impediment to understanding. That's exactly what jargon does; it turns language into a barrier for understanding. The solution is simple: look for unconventional language or insider's terms specific to your work culture and replace them with plain, clear language. Jargon steals some of the professional sheen from your proposal. And, your proposal will be misunderstood if the client doesn't speak the same jargon. 3. Use Correct Terms: Avoid Lazy Proofreading Triple-proof your text to ensure you used the correct terms specific to your client's work. Incorrect terms, even if from human error, make you appear ignorant. Your reader will not trust you if you're misusing technical language and terminology. Do the extra work of checking your sources and brushing up on the proper terminology for the subject. Sometimes simple writing fatigue causes these errors. Try to avoid rush jobs that depend on late night proofreading. If you know the job will require an all night work session, try to schedule time the next day to do more proofreading when you have fresh eyes. When you are very familiar with a document, it's always best to let a day lapse before you proofread. Your eye becomes so accustomed to the document that it becomes very easy to miss an error. Our onlinebusiness proposal writing course will help you avoid these three deadly sins of bad syntax and fill your proposals with a powerful, effective, and confident voice.

Marijuana Essays (110 words) - Cannabis In The United States

Marijuana Essays (110 words) - Cannabis In The United States Marijuana I think that the presidant should legalize the use of marijuana. If they are going to let some people smoke it and not others then that is biass and i do not appricate it very much. I am not a smoker of marijuana but i have many friends who do smoke it and they all do better in school then i do. I will not start smoking but all i am saying is that it doen't not hurt people who smoke it unless they are going to overdose then they are just plan stupid. This is my essay on what the governmaent should do on the trouble they are having with marijuana Bibliography Emma's Head

Automatic Control and Systems Engineering Literature review

Automatic Control and Systems Engineering - Literature review Example A block is a negligible component of Event-Condition-Action system that can state the behaviors represent in a process model. An algorithm is urbanized to detect blocks beginning a process meaning network and transform it into a hierarchical hierarchy model. The behaviors in every block type are modeled by means of ACTA formalism. This provides a hypothetical foundation from which ECA rules are recognized. The future ECA rule-based move toward shows that it is likely to execute the workflow by means of the active ability of database without users’ interference. The operation of the future methods is illustrated from side to side an instant process. FOR the previous several years, companies have been experiencing a lot of changes in their commerce surroundings. One is an interior change caused by the rising force for the need to satisfy a variety of customer wants. In order to meet the varied purchaser needs, corporations may have to branch out their commerce processes. Another alter faced by companies nowadays is an outside one resulting from the put in to in strategic coalition and e-Business. This modify compels a corporation to become caught up in the commerce processes of other company [2]. Not only have such interior and external changes caused by a lot of new commerce processes to be shaped, but they have also greater than before the difficulty of the processes. According to the expert analysis, the changes in commerce environments have shaped the necessity of knowledge and tools to make sure efficient and effectual process management. As a consequence, there have been many attempts to improve information systems towards as long as higher functions of process management further than simple treatment of self-governing tasks. A WorkFlow Management System (WFMS), a software tool to describe, administer, and pass multifaceted business processes there a new solution to the requirement of process management knowledge and utensils (G. Alonso, C. Hagen, D. Agrawal, A.E. Abbadi, and C. Mohan, 2000). Consider the commerce process obtainable in Fig. 1. This instance shows a process of credit card request, which is collected of variant behavior, such as â€Å"request form satisfying† and â€Å"form scanning.† A WFMS more often than not uses such a graphical symbol to explain the commerce reason. The model represents the priority relations among behavior and some structural relations, such as behavior proceeding in serial arrange or parallel. The symbol also includes thorough specifications of action, such as task performers, connected documents, and essential applications.

Program management Article Example | Topics and Well Written Essays - 250 words

Program management - Article Example PMO also aids in the improvement of the project success rates in an organization due to the incorporation of skills and expertise in the management of projects and ensures standardization of projects across the organization. The article goes further to give the two models of PMO; consultative and centralized PMO capacities and gives the other advantage of PMO as augmenting employee productivity through efficient resource allocation in an organization. The type of PMO to be implemented in an organization depends on the culture and the changes and benefits that the organization aims at achieving within a stipulated time leading to the need for customization and patience for a PMO office that result in increased bottom-line results, customer satisfaction, and resource utilization (Santosus, 2013). The article is useful in aiding the development of PMO through giving the benefits of having PMO, the strategies to introduce PMO in an organization, the challenges that are faced by a PMO, and the skills and expertise that the PMO brings to the organization. The article explores varied factors for the choice of PMO model to implement depending on the factors inherent in the organization allowing organizations to have a better understanding when developing PMO. The article also aids in developing the PMO due exposition of results from companies that have implemented the development giving companies a benchmark for their needs and results of a